Advanced Ancient Civilizations – Results of the LAH Expeditions 2004-2011 English Translation

Throughout the years many people frequently traveled around the world in search of evidence of advanced ancient civilizations. Starting in 2004 we formed an assembly of established scientists of many disciplines who decided to take a look at various ancient artifacts with their own eyes and from a scientific point of view Initially there was of course a question which they all wanted to answer And this is a question which interests a lot of people. And they always argue about the matter. And that is … Could the ancient Egyptians, being a relatively primitive society as we imagine them to be, in the middle of the 3rd millenium BC have built the pyramids of Giza. There are all sorts of arguments being made about it. Some talk about the number of workers needed for construction. While others estimate the size of the blocks of stone and whether they could have transported them or not. All these disagreements make us feel as if we’re running in circles. Because some people use certain numbers to prove that it was impossible for the ancient Egyptians to have built them. While others try to use these very same numbers along with some of their own to try to prove the complete opposite and say that it was indeed the work of ancient Egyptians. So this is where we seem to all be running in circles, and frankly it is getting a little annoying. Actually, at first we too were interested in the answer to this question. But as a result, I consider that we found a much better direction to head into. And this direction is simply this. If we look at the famous Great pyramid right there on the right. It’s weight is roughly 7-8 million tonnes. The second pyramid is a bit smaller. However combined, the three pyramids in Giza weigh in excess of 15 to 20 million tonnes. All made out of stone. So what is a million tonnes of stone? Well, somebody had to shape and transport the stone blocks to the building site. But first, let’s start with the fact that they had to be shaped somehow. If we consider the weight of all the megalithic constructions found on our planet. Then we will get a figure in the vicinity of 100’s of millions possibly even billions of tonnes. These are quite substantial figures. So we are talking about a colossal effort in construction and stone fabrication. Subsequently, when a construction is done on such an enormous scale no one will ever be able to make everything perfect and flawless. And in many cases being perfect was not even required, with techniques like polishing, etc. So there are certain undesired flaws in construction which remain. Some kind of traces of craftsmanship. Including the marks left by the tools which were used. Furthermore, it’s just a matter of simple logic. I mean any person can deduce if a piece of wood was carved by a knife, cut by a saw, or simply broken off by hand. After each of these methods, a specific trail of clues is left which tells us something about the method which was used. Same thing with stone, we have to consider the specific attributes of the stone. And we also have to take into account the laws of physics. Here’s a bit of physics. For those people who are not familiar with it. This graph shows the hardness of various materials. This is something they might teach you in a natural science class in school. So what we’re talking about here, is that if we try to process a hard material using a tool made out of a relatively softer material then all we will achieve is the dulling of the tool itself. In other words it is impossible to work with basalt or granite using copper. That is using copper alone. You must always use some kind of a additional element or an abrasive, like Quartz sand which is harder than granite. So in any case, the work would not be done by a copper tool alone but by the sand or a relatively harder material. So this is a simple occurrence which we must take into account. Here’s a good example of two vastly different types of stonework on a block of black basalt. On the right side, the stone was processed by a hand tool using a simple method of chiseling. On the left we have work resulting from machine fabrication. This conclusion is drawn from the fact that as a result of using a chisel on the surface it becomes rough and uneven. In addition the stone actually changes color, becoming whiter. In order to achieve the surface we see on the left, we need to have some kind of a very fast moving instrument. So it was probably a disk type saw rotating at a very high speed and not only cutting the stone but also polishing is as well. In addition, here we also have a trace of that very same instrument, which kind of veered off to the side and left this crease. This is a classic example, which might as well be included in the modern textbooks on stone working. Sort of showing a picture with the effect of a certain tool on a piece of material. Were it not for one small detail, this block actually lies near one of the smaller pyramids near the larger pyramid of Pepi II in Southern Saqqara in Egypt. Pepi II is considered to be the pharaoh of the 5th dynasty dating all the way back to about the middle of the 3rd millenium BC. So we are talking about machine based stone fabrication over 5,500 years ago. So we mostly concentrated our efforts on these types of finds. You may have seen something similar to this earlier today on the floor made of black basalt. Here you can see that the width of the blade which cut this block of granite is about 2-3mm (0.08″ – 0.1″). And here you can see the incremental notches left by a saw. This is a block which also lies near the Great Pyramid. Judging by the distance between the notches, the saw progressed at a step of 1mm (0.04″). This is not easy accomplish even using modern equipment. If it was in fact a flat edged saw which was used here. So when we talk about machine tools, what we’re really talking about is a diamond tipped cutting blade on a steel base. We are talking about technology which was clearly out of reach for ancient Egyptians. Here’s something you may have seen earlier today on your trip. This is a sort of a chopping block which was used as a base to cut other stone on. When the stone was cut, the saw then went further and made these chaotic incisions on the block below it. If you were to cut a stone block using a hand tool, then once stone is split, there is no reason to cut any further. So this instrument was moved automatically and with a high velocity. So it was clearly not something done by hand. Here is a sarcophagus in the Cairo Museum. It was placed deliberately with it’s back to the wall because it is unfinished on that side. If you look closer or if you maybe shine a flashlight at it then you can see the same notches we saw earlier. The notches run in different directions almost perpendicular to one another. Again this was cut by some kind of a saw which progressed with a step of 1mm (0.04″). So actually, this would test the limits of even the current stone manufacturing methods. And I don’t know if anyone noticed that floor made out of black basalt near the Great Pyramid. There it is evident that many of the cuts on it were made chaotically. It almost seems like a welder testing his electrode on some kind of a piece of scrap material …he touches it with the electrode and a bit of weld remains there. Same thing here. Someone made this with a single swing of the tool. There is no meaning behind it whatsoever. But you can see that this cut was made in literally one or two motions. So each cut is a result of a single movement of the saw. Using current technology, a cut like this could possibly be made using a huge circular saw. This is a block of red porphyry located in Abydos in the world famous Osireion. It’s about 6-7 meters (20 – 23 ft) in length. So, can you imagine the size of a flat edge saw which was used to cut something like this block. The saw would have to be over 10 meters (33ft) long just to achieve the swing needed to cut this block. Clearly, no copper or bronze tool could be used here since it wouldn’t maintain it’s stability at that size. Here we see that they sawed this block up until the line a bit below the top and then broke off the rest. Almost identical results can be achieved in modern times when we see a stone cut in modern stone cutting facilities using a disk shaped saw. The saw is spun, and is then passed horizontally, leaving the horizontal cut mark. Furthermore, our modern blades only advance with an increment of 2mm or 3mm (0.08″ – 0.1″) max so as not to overload the saw. So if it was in fact a disk based saw which was used, then we are talking about a saw with a minimum diameter of 2.5 meters (8.2ft). The maximum diameter of a modern disk stone cutting blade is 3 meters (9.8ft). Anything larger would compromise the steel disk. The diamond tips on it wear off constantly and must always be replaced. But more importantly, the steel disk can’t withstand the load. We currently don’t have any material which could withstand the load exerted upon it from such a cut. These are all ancient objects. No one has touched them, cut or drilled them in any way using any kind of modern equipment. This is a granite block in Abou Rawash. Here you can see the cuts made by a saw which accidentally made a small detour. So if this was cut with a flat saw then the saw would have to be moved like this. But actually this block is curved throughout it’s surface on top and bottom. So ideally it could have been made by that same type saw of about 1.5 – 2 meters (4.9ft – 6.6ft) in diameter. as was explained to us by the lead foreman at a modern stone manufacturing facility. Or it could also have been done by a pendulum type saw. However, given the radius of the cut, we would have to suspend the pendulum saw a height of 10 meters (33ft). A fairly substantial distance. So what makes up a disk saw? Well, it’s the mechanisms which rotate the disk. Also, energy must be supplied from somewhere to facilitate the rotation. So on and so forth. So in other words, disk type saws are really a result of advanced modern machine based manufacturing. This is a back of a sarcophagus in Saqqara. What looks like a very negligently done work, with some tool that’s similar to a hand held grinder. Here is another mark left by a disk saw also in Saqqara near the Userkaf Pyramid. So, this disk would have been about 40cm (16″) in diameter. This is a block in Abusir, in an area which is currently closed off to tourists. Here you can see a cut which runs along the top of the block. This is a continuous single cut and it looks like this. It shows that the cut was practically made with one single swing of the saw and then the rest was broken off. And not only was this cut at a curve but this cut is at it’s deepest at about 13-14cm (5.5″). Again, it seems as if something like a portable grinder was used here. But, to cut such a hard material as black basalt using a modern handheld grinder the worker would only be able to cut at a depth of 1-1.5mm (0.04″ – 0.06″) in one single pass of the blade. So, what kind of material was this tool made out of, and what kind of strength must this craftsman have posessed in order to apply such an unbelievable amount of force on this tool. So actually, this kind of cut is out of reach of our modern stone fabrication methods. This is in Karnak, Egypt. Seemingly showing some ordinary decorative grooves which run alongside the pictograms. Again you get a sense that something like a portable grinder was used to cut these grooves. These are granite gates. Most tourists pass through them when visiting this site. The height of this gate structure is 5-6 meters (16ft – 20ft). This groove spans the entire height of the monument and there are similar ones near it as well. The other side of the gates has the same types of grooves. And this is what it looks like close up. The depth of this cut is about 1cm (0.4″), at times maybe a bit more. Basically this is a V-shaped cut with a width of about 3-4mm (0.11″ – 0.15″) on entry at the top and practically zero width at the bottom. It’s about 1/10th of a millimeter (0.004″). Not a single one of our modern materials which we use for cutting can withstand the load exerted upon it given a similar circumstance of working granite like this. In other words we can’t even imagine what this tool could have been made out of. Here we have the same groove but a bit further down. The width of the cutting blade was about one to two tenths of a millimeter (0.004″ – 0.008″). For a comparison, the blade on a modern disk saw can’t be wider than 1cm (0.4″). Yes, 1 centimeter (0.4″). Well, you could if you were also using an abrasive material, then the blade would be self sharpening and you would get an oval wedge type tip as a result of grinding down. But its still a minimum of several millimeters in width. Anything smaller would break the saw. We found these disks on display at the Cairo Museum. I’m not sure if we will encounter them again because they were removed from the exhibition for a while. They are stone disks similar to our modern CDs maybe a bit thicker and a hole in the center. Made from all kinds of stone. As the photograph near their display tells us, they were supposedly found alongside some wooden arrows. In order to produce one of these disks you would need to have access to modern machinery, something like a lathe. Here is yet another example of machine fabrication. This is done by a tube drill. This was not drilled with a solid drill bit but specifically a tube shaped one. The drill proceeds to a certain depth and then the tube is removed. The remaining central core is then given a good bump from the side and it breaks off from the rest of the stone at it’s base. This is a very convenient method of drilling, whether on granite or black basalt. Actually, the core doesn’t break right at the base but a few millimeters (few tenths of an inch) away from the end of the cut. And you can see some interesting parameters as a result of that. Here we’ll talk about some other parameters. We see the notches left by a drill. You can see that they are regularly spaced in increments of 1mm (0.04″). From this we can draw a conclusion that the drill progressed with one whole millimeter (0.04″) in one single rotation. 100 years ago when Flinders Petri, a famous Egyptologist encountered the same problem, he considered it as precisely as that, a problem. Back then it surpassed the stone manufacturing capabilities by a factor of 1,000. Today of course we have caught up and are now capable of much more but nontheless in order for the drill bit to advance to a depth of 1mm (0.04″) there needs to be a high velocity of rotation, at a minimum of 10’s or even 100’s of revolutions. So this in fact is much more powerful than even the current technology we have. You can see them in Saqqara as well. This is in Karnak, Egypt. Here you have a tube like drill used with a diameter of roughly 20cm (8″). But here you could see the cut made by the tip of the tube drill There is a bit of the core remaining resulting from it not being completely broken off at the base. So you can see that the thickness of the blade tip was about a millimeter (0.04″) given a 20cm (8″) diameter of the overall tube. This is an area which is closed off to tourists. Also in Karnak. There is an overpass with a similar drill hole made in the ceiling of about 60-70cm (2 feet) in diameter. For a comparison, modern fabrication equipment which could cut granite like this was first mass produced in Czechoslovakia around the end of 1980’s to the early 1990’s if I remember correctly. But then again we are talking about a diamond attachment to a tube made out of steel. Here is a small and seemingly insignificant hole made in a granite block of the obelisk at Karnak. This hole which has a depth of about 10cm (4″) and it is cut at an angle of about 15-20 degrees. Those of you who have ever worked with a drill could imagine what it’s like to try to force a drill into a concrete wall using a single swing. The drill starts to go sideways. Meanwhile, there are no signs that any kind of hammering took place here, and the drill bit entered this granite as if it was packing foam or soft wood. At any angle. The purpose of these holes is actually to hold a decorative panel maybe made out of gold or copper. Today we would drill holes like this one in a wall for a screw or an anchor to be inserted in it. So, this hole serves a very similar function, however it was drilled in a very hard material. This photograph was taken in the Serapeum in Saqqara, Egypt. Visitors are not allowed in this area. These are some boxes, there are about 20 of them there. The total weight of one of these things including the lid is estimated to be 100 tonnes. This box is monolithic meaning it is all made from a single piece of stone. Not too long ago Christopher Dunne conducted the following experiment. Didn’t give a reason, just wanted to try it. He tried to get a similar box manufactured using modern equipment and even sent out requests to stone manufacturing facilities throughout the United States. He was told that, yes, we can make something like this but only from 5 separate parts. In other words the bottom and the five walls. And that at the present time making it monolithic is beyond their ability. Meanwhile this was all under the assumption that money was no object. So, not a single modern company took up his challenge of making a box like this out of a monolithic piece of stone. Aside from that, you can judge the quality of craftsmanship for yourself by the presence of a near mirror like reflection on the bottom of the lid of this sarcophagus. Another problem arises when trying to date this sarcophagus. The ornamental etchings and writing seen here attribute this sarcophagus to the new kingdom, or only about 3,000 years ago. Clearly you can see that the writing here is made on top of a previously damaged area. If we visit the Cairo Museum then you will see a whole row of these sarcophaguses where old damaged areas were not polished off completely and are actually visible. And the writing runs on top of those damaged areas. Which is clear evidence that the writing was applied much later than the actual production date of the sarcophagus. So you can’t really establish the age of a sarcophagus just by looking at the writing on it. You can only say for certain that the sarcophagus already existed at the time but for how many years it existed is impossible to say. This is something we could see in Dashur. These are pieces of a sarcophagus, thought to be made of quartzite but evidently there is no pure quartzite in Egypt. And so this is half quatzite. Basically an undercooked sandstone. Not quite quartzite. In other words a more easily workable material, but still. And with these pieces of a sarcophagus we are dealing with interior angles made using 3 planar surfaces. Not a single modern stone working plant is capable of making those kinds of angles. When we consulted with the people who were developing a laser at a research facility in Troitsk near Moscow. They said that, yes, you can do this with a laser but you would need to have a power generator that is half the size of this room. And that is only to supply the energy needed. I’m going to jump ahead a bit and say that we did not discover any indication of them using a laser on these blocks. The use of a laser results in some melted material being left there, even if only a little. There were no traces of any melting there. Furthermore, not only were they able to cut such complex interior angles, but they also removed layer from the surface of the stone. This was the bottom of a sarcophagus, and this was done so that the corners would not be damaged too much during transportation. Another thing which resembles modern machining methods is found here in the Aswan Quarry. There are these pits which were supposedly used to check the stone for cracks. You could only fit in them if your arms were folded along your sides. So they’re only about 60-70cm (2 feet) in diameter. And at the same time, some of the pits are 6 meters (20ft) deep. When someone tries to prove that these pits were dug using hammerstones… Can you imagine a worker who was held by his legs. As he lifted the hammerstone to his face and then dropped it, and this somehow was supposed to have crushed something. It’s unthinkable that he would go down 6 meters (20ft) in this manner. While also somehow achieving seemingly polished walls. This looks to be the work of some kind of a funny shaped is another. There are about 20-30 of these pits on that site. They could have been done using some kind of a semi-cylindrical, maybe an oval shaped instrument which was also probably used to carve out the famous obelisk, where the stone was removed along it’s sides in this manner. In fact, there was so much excess material removed from the sides that it seemingly wasn’t that much of an effort for them. Doing this work without machine type instruments is very difficult to imagine. Here in an area in the same quarry which was recently opened to visitors. You can see a block which was probably going to be used to make some kind of a statue. As we learned from our textbooks, to carve out a stone block, the material is removed on the sides and the bottom and then we use a wedge to break off the central piece. Not here. The material was also extracted. Here, these regularly extracted areas are also polished on the surface. Not the kind of surface which results from chipping away at the material but one which but one which was deliberately polished. This was a sort of a side effect of the instrument which they used. This is something we can see in Saqqara, Egypt. It is a series of very level floors. This gives an impression that they were leveled like we would our polish our wooden floors. In other words, after the blocks were laid down. There is a similar floor made out of limestone in Southern Saqqara. This one spans about 6-7meters (20ft-23ft) in length. And on the edges, you can see that this was a single block which had about 7-8cm (3″) removed from the top. In other words, first they laid down the blocks and then straightened them out where they needed. As a side effect of their work, the limestone actually changed color on it’s surface to a depth of about 1cm (0.4″). What was this a reaction to, maybe some kind of a chemical or a temperature based influence. There are many possibilities here. If it was chemical then the question is what did they spill on it. If it was temperature based then the question is how fast was the tool moving in order to change the color of the limestone to such a depth. Here we are in the Aswan Quarry again. And this is a vertical wall. Here are some people so you can get a sense of the scale. You can see that the wall is about 2-3 stories high. This wall was simply a result of material being removed. It runs to this corner and then curves at a perfect radius of about a half a meter (1.6ft) at an angle of 90° and then curves again. When we consulted with the lead technologist at the stone working facility he said that something similar could be accomplished using a plasma burner working with a temperature of about 1,000°C (1,800°F), and this would have to be a directed effort done on purpose. But here we have this simply being a side effect from some kind of an instrument. Here you see how the stone masters laid a block in Abydos, in Osireion. The block extended into the neighboring wall. Then they cut off that side of the block and somehow staightened out the surface. This block is about 1.5 meters (5ft) in height. We saw this today in the Granite Temple where seemingly you have blocks which wrap around the corners and enter the neighboring wall. This effect is easy to achieve… of course “easy” is only a relative term. If you have an instrument which can take off a significant portion of the top layer of stone. You lay the stone unevenly and then remove about 10cm (4″) from the top. At the present time we don’t have any kind of technology needed to accomplish something like this. And since time is running out…I won’t focus too much on the smaller objects found in the Cairo Museum. Marks left by a disk saw were also found in Syria. Signs that this column in Lebanon and a similar one in Abydos were produced on a lathe or some kind of a spinning machine. Here I’ll show a couple of small objects which we found in Mexico. These are something similar to small spools from a sewing machine. Actually the largest of these objects are the size of a sewing maching spool. You can imagine a small spool which is used to collect some thread. This is made from Obsidian which is volcanic glass. The idea that Indians who didn’t even have the wheel would be working with something which could only be made using a mechanical lathe. And they cut it… Obsidian is easy to work with when it is chipped… and here we see that it was actually cut. It has a hardness of 5. Again, you have to use something like a Korund or a Diamond or something like that. Sure, they could have used these for ritual purposes. Slicing their lower lip and using it as a stud for decoration. Well, if you give an aborigenes a ball point pen and he uses it as a nose ornament instead of a stick. Does that mean that he manufactured the pen? And this little object is even smaller and made from mountain crystal. The only way to work mountain crystal is by using a diamond. These objects are a bit larger. About 5-6cm (2.4″) in diameter. Maybe used as some kind of a plug but I can’t imagine the purpose they must have had. They are also made from Obsidian. Here is something else made from Obsidian. Again, I can’t imagine what the function of it was. My best guess is it could have been a ferrule from some kind of a mechanism. But why did it have to be made out of Obsidian? And near it we have some common objects: knives, chisels… all made from the same Obsidian. They wanted us to see that it was all found together. Here we have a small tube made out of Nephrite. The thickness of its walls is only about 1.5 to 2 millimeters (0.06″ – 0.08″). And it is drilled all the way through. It is completely hollow in the center. So again, what was used to make it? If it was made with one of their primitive hand tools, I can’t even imagine. However, when we attribute this to machine manufacturing then everything falls into place. And of course the most killer evidence is in Peru and Bolivia. So, here we have huge blocks cut out of a mountain which were then transported anywhere they wanted and shaped them however they wanted. Here is a wall made using a polygonal stone working method in Ollantaytambo, Peru. Here a wall is embedded into a side of a mountain, this makes the structure very seismically stable. And it moves with the mountain in the event of an earthquake. These blocks weigh over 400 tonnes each and they were actually raised to a height of 600 meters (1,900 feet). And they were placed in such a way that there are no spaces at all between them and the decorative inserts. And subsequently, there are other walls there as well. And you can see that after some kind of a demolition occurred, the blocks were inadequately repositioned and the spaces between them were filled with common unshaped rocks and clay mortar. So, it’s immediately clear that the rough unshaped rocks along with mortar is the work of the Incas. There is no question about that. But then a question arises, who made those structures before them. And the thing about Peru and Bolivia is this… If in Egypt we may have some things which could be said were in transition in terms of technology, quite a few disputed issues. Here the picture is very clear. Here we see the bottom layer made using a highly technologically advanced method of stone fabrication, that is exceptionally laid together, while not using any mortar. And on top is what was done by the Incas. Sure, they reused the blocks from some other construction, and they used whatever material they had on hand. This is a vertical mountain where all kinds of niches, steps, shelves were cut into it. In other words they did whatever they liked with the mountain. Here is a monolithic construction which is actually a part of the mountain. And this piece near it was carved from another place and just inserted there. Meanwhile, the amount of effort to do this would have been incredible even using modern equipment. What the reason behind it was, that is unknown. The only thing you could possibly fit in these niches is maybe a book or a small bottle, that’s all. And a bit to the left of that there is a kind of a platform surface. Which Aleksandr Dymnikov from our expedition is seen here photographing. There is an oval shape cut vertically out of the mountain. And the resulting surface is also polished from the cut. And below you can see a sort of a net-like pattern cut into the base. The function was possibly to prevent someone from slipping on the surface if it was raining. You can see something like this on the steps of the subway in Moscow. Where they just passed through the surface with something like a portable grinder with a diamond tipped disk. And here we see that it was cut, not only that, but it was a dual cut using a blade with a thickness of only about a millimeter (0.04″). Here is a mark left by a disk saw in Sacsayhuamán. There are very clearly evident traces which were left by a disk shaped saw. No other kind of instrument comes to mind. We are clearly not dealing with any Incas here. With their primitive bronze tools. And right near it is about a centimeter (0.4″) deep groove cut into the mountain. This groove spans a whopping 10 meters (33 feet) across. Very similar to when we work with something like ceramics or glass. When we score the glass and then break the rest of it off by applying a bit of force. But here it was done on a mountain and the piece which broke off weighs several hundred tonnes. Again here you see the instrument entering the material at a depth of 1 to 1.5cm (0.4″ – 0.6″) using seemingly a single motion. As I mentioned before, even working with a modern tool like a portable grinder it would only be able to cut into something as hard as this diorite by about a 1mm (0.04″). Here you can see how deep all this is. And you can see the broken off piece of mountain below. This is one of their other creations. Those who could work with the mountain like this. This is all granite, local andesite. This is in Puma Punku, Bolivia. The color and shape of the blocks give the impression that they are made out of concrete. But actually it’s local andesite. Here in Bolivia we are in luck because many of the things were buried for a long time and were only recently unearthed by the archaeologists. Therefore, all of the sharp interior angles cut into many of the blocks found here, retained their perfect original shape since they were not damaged by the elements. This is actually work on a master level. And modern stone working professionals are baffled by how this was done. We are clearly not talking about any kind of a primitive tool being used here. This is something fabricated using a machine. Furthermore, in many cases using technology which greatly surpasses our own. Take a look, here we have an interior angle made out of 3 plane surfaces. This is one of the cases which proves that this was not concrete but actually a result of a mechanical cut on a natural stone material. A hard fragment of stone which was cut off along with the rest of the material. If it was made using a concrete mold then this fragment would just sink slightly below the surface and we wouldn’t see it. Here is another example of clear signs left by a machine-type fabrication. On the other side of this small block there is a vertical groove into which a series of holes were drilled. These holes are roughly 2-3mm (0.08″ – 0.1″) in diameter. Why they were drilled, is unclear. This was done by masters of stone work and with seemingly little effort. Here is another block. There are rows of holes on this block going every which way. Here they split up, one goes down, the other one goes this way. And these two grooves on top actually approach zero at the edges. So again, some kind of a disk type instrument was used to make these grooves. Something which could easily cut granite like this. This is a classic example from Machu Picchu. Considered by mainstream archaeologists to be a tomb of some leader. It was actually empty when it was discovered. Looking a bit like a modern sauna. Here, the natural side of the mountain and these embedded blocks give an impression that they are made out of some kind of a soft clay or plasteline. Here, we initially thought that the front portion of this block was sawed off. However, when we looked closer at the edge of the cut. It almost seems as if they used some kind of a wide screwdriver and poked at the stone then broke the rest off by hand. In other words as if they were working with some kind of a semi-soft clay material. And on this block, this darker portion is about a millimeter (0.04″) deeper than the more yellow colored section above it. It gives an impression as if this layer was actually removed by hand. These are technologies which are not only a mystery as to how it was done, but also the chemical and physical processes by which this granite was shaped are completely unknown to us. We don’t even have a theoretical understanding of how this was done. Here we also have a block with an interesting cut in it. If you can imagine running a hot knife alongside a cold piece of butter. The edge of the cut is bent outward a bit. And here we see the same thing but on a piece of granite. As I mentioned before, these technologies are completely unknown to us presently. So I will stop with the examples and state my concluding thoughts on the matter. The first conclusion is this: Are there facts which prove that in ancient times an advanced civilization left its mark on our planet? Yes, there are. Furthermore, a technologically advanced civilization which was capable of advanced machine manufacturing. There are so many traces of this. We found literally thousands of cases of signs where advanced technologies were used. So in my view, the question of was there or wasn’t there some kind of a highly advanced civilization on earth in ancient times. I consider this case to be closed. There was. The evidence exists to prove this 100%. Secondly, this overwhelming evidence dispels the most essential arguments which our current academic establishment has towards ancient myths and legends. We see that this was done by some kind of a highly advanced civilization. The capabilities of this civilization greatly surpassed those of our ancestors. And so if we face the facts, then there had to have been some kind of representatives of this civilization. Who regardless of their visual appearance were regarded as gods by our ancestors. Therefore, we can transition away from thinking about myths and legends as mere works of fantasy and imagination and into the realm of practical investigation. That is the second most important point in my view. And thirdly, we can now begin talking about what kind of a civilization it was. Earth based or extraterrestrial. But most importantly, we can try to achieve the same. If someone else did it already, then we can do it also. We have to try if not to make the same kinds of technologies but at least find their equivalent. Just imagine having access to mobile tools, and they’re clearly mobile since they worked in the mountains of Peru and Bolivia. Mobile instruments which could cut mountains and transport them easily from one place to another. We solve the problem of building in hard to reach mountainous regions. We solve the question of colonizing other planets, and so on and so forth. We no longer need building materials. All we need is the technology and the tools. That’s all. This is a colossal perspective to undertake. I won’t go into conclusions drawn from myths and other things. But at the very least I consider that we can now start moving in this direction. We have to move away from the argument of was there or wasn’t there. We resolved this, case closed. Let’s try to understand what kind of a civilization this was and what were its capabilities and let’s try to accomplish the same. Thank you.


  1. energyquicksand said:

    Egyptology says that it took twenty years to build the big pyramid. To do that you would have to place one block every 4.7 minutes…24-7-365. Half that 2.4mins for a 12 hour days no holidays. Doubtful from a logistics point of view.

    December 9, 2013
  2. Pepper Puppy said:

    I suppose there's a chance that Roland Emmerich was right in the movie 10,000 bc and woolly mammoths helped build pyramids

    December 17, 2013
  3. saysmikey said:

    Excellent video on the observable characteristics of megalithic artifacts found in numerous sites about our planet. The conclusions of the level of technology required to produce these artifacts are clear, logical and undeniable by anyone of moderate intelligence and education. Best I've ever seen, Andrey Sklyarov. Thank you for your translation Kon K.

    December 26, 2013
  4. kan969 said:

    EXCELENT  presentation!!!!

    January 5, 2014
  5. Raivan31 said:

    If they used vibration they could make cuts like that, resonant frequencies. they don't require advanced tech to utilize, just lots of time and study to get it right.

    February 1, 2014
  6. Leanna Keyes said:

    I have a place in Los Ayala, Mexico… I was given a head that was found while excavating… it looks like a viking…. everyone rolls their eyes… has nothing to do with the Egyptions… but there are things out there that are yet to be discovered.

    February 5, 2014
  7. stuart fuins said:

    we are mars we are the moon we reside on Earth <3

    March 9, 2014
  8. Kyle Ferendzo said:

    whats with the watch

    March 23, 2014
  9. Cenk Zappa said:

    is that Mitt at 10:02

    March 26, 2014
  10. James Arte said:

    And how were these tools powered?

    April 14, 2014
  11. Piotr C said:

    Egiptians tried to rediscover this technology, perhaps they found generator/engine but they coudnt use it. And here comes biblical Moses who stole it with jews and used it during run across the sea. Jerycho, etc…

    April 26, 2014
  12. NASA MAN said:

    24.33 Guy in background is so tired of it all.

    April 27, 2014
  13. Thomas Pieters said:

    wonderfull explanation, tecnical based and real clear. thanx!

    August 24, 2014
  14. Mac Fou said:

    This technology was lost because black history was destroyed . Black history is world history

    August 27, 2014
  15. MrFred5m said:

    I  am a rock layer/bricklayer ,  I found this to be very interesting and informative ,  I have used saws and drills on rock and other materials and for those who have not had the experience of carrying out this type of construction , in this day and age , the difficulty and time consuming effort cannot be understood .  all of this was very impressive .  Thank You.

    November 6, 2014
  16. Bottlecapbill said:

    They've found plenty of evidence that Egyptians(and other civilizations) used stone saws.  It was quite common and they're still used by stonemasons today……..I don't see where the mystery is?  A copper saw, sand for an abrasive, muscle and time.  Nothing more is required.

    November 9, 2014
  17. MultiGazman said:

    This is a great video,Look forward to more! I went to the link and the video has been removed?

    November 15, 2014
  18. francois clermont said:

    Instead of thinking enormous circular saw, alien user immaterial desintegrator energy field  cutting tool i am thinking more of a chain saw much more easy to have 2 meter reach, it is not realistic to think of alien machinery that had to be replaced or repaired.
    kind of civilization is : interstellar space travel with space ship able to go beyond speed of light ,equipment they have would be beyond our wildest dream , anti-gravity pods ,CNC machine with easy moving and great stability.

    November 21, 2014
  19. jeffborne1 said:

    Absolutely great translation! You sound so much better in English than Mr. Sklyarov in Russian. I guess he owes you a big, big 'thankx' for your rendering him an opportunity to extend his views and ideas to millions in excellent English. But I don't think he will ever do it. From what I know, he is a very arrogant person and a hard-boiled Russian Patriot.

    December 6, 2014
  20. Parallel Past Institute said:

    +Bob Roberts
    Yes, there are paintings on Egyptian tombs of Egyptians "working" on statues and drilling stuff, most notable one from Rek'hmire tomb. The one you showed was a person working on a wooden table. The murals often show a person using a bow, the drill bit is depicted as solid, not tubular, although it's hard to tell. You really have to get into the technical aspects of drilling and different materials and their strengths as well as what was their first recorded use. The images which depict bowl shaping for example were showing the use of a very crude instrument with two stones as counterweights at the top and a small flint stone on a bottom of a curved stick. However, when you see some museum pieces, like at the Brooklyn Museum of Old Kindgom vases and offering tables with regular grooves in hard stones like Anorthosite Gneiss then you start to doubt as to the effectiveness of that instrument. It was however used on vessels made from Alabaster(yellow translucent gypsum and fairly soft), they are almost all non-symmetrical and look like they were made by hand. Can't comment on Ed Leedskanlin, I have no idea what went on there. My advice is, to separate some of the things you're talking about. If you want to study evolution, then learn biology, read Darwin and read the recent papers which are already detached from the theory of natural selection and there are all new concepts now of jumping genes and big bursts of evolution in very short time as has been shown with fleas. Because we understand genetics and chemistry much better now, we can begin answering these questions. We did not understand them in Darwin's time. The problem is that the mainstream media, isoteric and alternative personalities will not explore these areas because they are not simple and can't be easily sensationalized. In short, if you want to comment on a certain topic with any coherency, you have to become acquainted with it almost on a professional level. Nobody will teach you this, you have to go to the University libraries and start reading…the stuff is all there, not on History channel.

    January 14, 2015
  21. SuperNewKittie said:

    I guess it's beyond our means to know, but I would love to know if there have ever been civilizations more advanced than we are now, as in millions or hundreds of millions years ago.  After watching a few 'conspiracy' videos, and a documentary that seem to point to structures on the moon, I've wondered if it's possible that humans from eons ago might have had something to do with it.   I know it sounds kind of crazy.  

    January 15, 2015
  22. slowhole said:

    This is all explained if you share the view that this planet is really only 6,000 years old. The nephilim, also known as giants (not all were giants) who clearly lived on this planet indicated by countless archaeological discoveries, had a great amount of knowledge about the physical world. Man used to be much more advanced but we are victims to the law of entropy (order to disorder) just like everything else. We also lost much of the past thanks to the flood witch obsessively happened. This is the most obvious reason so many fossils found in layers of sedimentary rock. There are even layers that were bent while still soft and dried in many contorted positions. Just look up some bent rock layers. They had to be soft and formed at the same time or else they would be cracked from bending and each layer should have evidence of erosion if they were put down over millions of years. look at how beautifully smooth each layer in grand canyon is. This did not take millions of years. It simply couldn't have. Poly strata fossils are also found. These fossils are 100% proof that they are not years apart.. Obsessively these layers were all put down at the same time. I only say this to provide a little bit of evidence out of the mountains that I have that man was made in God's image so it only makes since that there were civilizations more advanced then us in the past.

    Thank you for the video. It only helps prove my point and strengthen my faith. I hope hat it can do the same for all of you as well.

    January 15, 2015
  23. greenshadedthing said:

    it definitely looks as manufactured by mechanical instruments (saws etc) but why weren't any of them found ? where are they ? i dont think that they achieved all of this with simple copper tools, but no big machinery either… it must be something else, something so simple that we keep missing it

    January 31, 2015
  24. Cynthia McLaglen said:

    If people in the Indus Valley near the Sarasvati River in Mehrgahr could drill teeth 12,000 to 9000 years ago, surely drilla could be made to drill other objects also and create pottery as they also created these pots also. Cynthia Allen McLaglen

    February 13, 2015
  25. Baz Metse said:

    This will get you questioning what you've been told about ancient history.

    February 19, 2015
  26. francois clermont said:

    Instead of thinking portable tool you should consider CNC machine mounted on a stabilized anti gravity platform with desintegrator cutting energy field very narrow like 1-2 mm wide and at least 3 meter long ,vitrification/polishing is a side effect of cutting ; since it is an energy beam it can be adjusted oriented and do not required immense force to cut ,any matter touched by the beam is sublimated and will exit cut face like a very fine dust of mono-atomic particle .

    February 28, 2015
  27. francois clermont said:

    Brilliant demonstration ,Aliens came with theirs incredible construction equipment work by themselves for hundred of years with highly automated self propelled machine , they left some 10500 years ago , just hope in future they may put some video on you tube to our knowledge and understanding  

    February 28, 2015
  28. Nigel King said:

    Wow! Thankyou.

    March 8, 2015
  29. John Roseborough said:

    its funny I've cut a considerable amount of cement with a 14 in.dia. gas powered saw. its state of the art. I also have drilled a thousand holes  with my makita hammer drill also state of the art for it's purpose. 10.000 skilled people just like me with 10.000 cement saws and drills could never accomplish any of these feats of construction. hypothesize all you like. In the real world it's impossible. My saw leaves exactly the same trace markings at around 5-6000 rpm  although my cuts are nowhere near as consistent.

    March 9, 2015
  30. AC TV said:

    Very stimulating, thanks for posting

    March 17, 2015
  31. Улус-Джучи said:

    Несомненно намерения благие,  и я понимаю, вас, Константин, но мы сами не раз предлагали Андрею переводить контент на английский, его реакция всегда была сугубо отрицательной, из-за того, что наиболее известные западный альтернативщики,  видят в изысках в основном коммерческую подоплеку, и как я понял, АЮ не хочет  дабы его интеллектуальная собственность была использована англоязычным коллегой в своих целях, без ссылок на авторство. как то так.

     с уважением админ форума и кинозала ЛАИ -crimea.

    March 24, 2015
  32. LetsGo Now said:

    Out of sync video/voice

    March 27, 2015
  33. Stone Wall Research - budcat7 said:

    Hi keeps on saying "they made the cut AND THEN they broke off the rest. Why is that? Maybe the piece that is broken off was a perfectly cut addition to the blocks considered. Not that they THEN broke off the rest, the "rest" was broken off later due to extraneous forces made by something who knows but this does not necessarily suggest that they cut something and then broke something off. It "got" broken later. Maybe it's just a flaw in "nuance" in the translation. I think Velikovsky's cataclysm was responsible for all the "blown up" megalithic sites around the globe.

    March 29, 2015
  34. Chris Ryan said:

    Awesome, finally something from LAH in English, thanks to whoever took the time to do this, it is truly appreciated. 

    April 6, 2015
  35. guramannen said:

    After many years of continues interest in it; this is by far the most informative video I've found on the subject.

    April 15, 2015
  36. Rusty Smith said:

    Seems obvious to me we've two ways of looking at it. First is mankind has been beyond out current level of technology in the past and something has happened to send us back to the stone age,,,or,,, some other more advanced species has been to earth, aliens maybe ?. Either way it's fascinating and i'd love to know which it was.

    May 14, 2015
  37. Joseph Martin Augustin said:

    What if they had electrical wire cutters which we use for cutting thermocol and sponge.The stone is treated to soften and made workable.

    June 26, 2015
  38. Mario Perera said:

    U guyz have to visit sri lanka too ,to c da amazing stone carvings with our historical places ,Ex.sigiriya ,A`pura,P`naruwa ,& like to know your opinions of them.

    July 4, 2015
  39. carpo719 said:

    Great presentation. Thank you for the efforts posting this

    July 12, 2015
  40. ken ken said:

    They look like they need a drink,,

    July 16, 2015
  41. ecocivilian said:

    Great stuff shown up here if this kind of results are not considered evidence then i really believe in conspiracy  wich it is & i"m curious how long it gone take before w"ll have a bunch GoogleHit debunkers  making a queue to making some fools of theirselves

    July 26, 2015
  42. toxic monsanto said:

    The remnants are all over the earth. So many archaeologic dig sites, so little government over-site.

    September 12, 2015
  43. pappawheely said:

    We could have done it in the future………..somehow it is in the past …now, finding it, again? great video, thank you

    October 4, 2015
  44. Gabriel Seth said:

    is there any direct proof that the pyramids were actually constructed by the Egyptians themselves, or is it possible that they are far more ancient, and were just kind of taken over by Egyptians? The head on the sphinx is substantially disproportionate to its body, which suggests that the original head may have been that of an actual lion which was later carved down, and there is considerable erosion on it's body which was apparently caused by lots of heavy rainfall, which needless to say is not all that common in Egypt nowadays…

    October 30, 2015
  45. Will Hart said:

    The Egyptians lacked the tools necessary to work diorite and/or lift 100+ ton blocks out of any quarry let alone the aswan granite that had to be ferried 500 miles down river. It i silly to in circiles about it because the largest statues in Egypt weight 500 tons and we don't have a moble crane or Earthmove that can lift or transport that load…Period! We are talking scientific facts here and not academic psychobabble…These things are proven.

    November 10, 2015
  46. Grand Vizier said:

    Thank you! I suppose you have enough other things to do, but I would highly appreciate it if you could translate some more productions of this Russian research group.

    December 8, 2015
  47. Chris Bourke said:

    Thank you for what you have done.
    This is the 3 time I have viewed. I accidentally deleted the bookmark and have been searching through so much low end Egyptology.
    Greatly appreciated.
    Any recommendations re Nootropics?
    Thak you again

    February 3, 2016
  48. Pablo Leone said:

    agree 100 %

    February 9, 2016
  49. Dianna Skare said:

    thank you for all your work ! I sure hope they listen and start investigation in earnest!

    February 13, 2016
  50. Ant Man said:

    WILL prove i can carve this Exactly to spec's
    Larry Anthony Schaffer Facebook, see artist Mason Larry Anthony
    if you seriously want to see what the ancients did with THEIR POWER TOOLS
    dont kid yourself to believe they hand no PNumatic, plasma, or ac power sourse
    be well
    i bet i will hear fro producer or director? scientist
    L Anthony

    February 18, 2016
  51. Aidan Stewart said:

    Best investigation I have seen on the subject of how the ancient monolithic structures were fabricated and transported.

    April 16, 2016
  52. Richard Wilson said:

    So, Stargate.

    April 18, 2016
  53. Noel James Riggs said:

    The person translating this did a fantastic job. Great work.

    April 21, 2016
  54. Pakshya mich said:

    great work..

    April 25, 2016
  55. PickledOnion said:

    giAnts! 🙂

    April 29, 2016
  56. Peter Doornekamp said:

    Thank you so much for translating!

    June 15, 2016
  57. Nomad Wizard said:

    No, stone can not be analyzed using today's techniques as there are countless S. American tribal stories of stone being soften using a paste from a plant or plants.

    June 28, 2016
  58. Captain Commodore said:

    You may read the book "THE ORIGIN OF CONSCIOUSNESS IN THE BREAK DOWN OF THE BICAMERAL MIND" from Julian Jaynes. It is maybe the missing link you need.

    July 20, 2016
  59. Her Shadow said:

    Fascinating! So much has been forgotten by humankind.

    July 25, 2016
  60. MsArgentana said:

    In addition to the necessary technology, as explained, it is to consider the fact that to build a structure like those at Giza it takes engineers and highly experienced geologists for them to remain intact over time …

    September 17, 2016
  61. Gary Shaw said:

    the stone on the left at 4:39 could have been from a brush with something hard on the outside. we used to polish retainers with a soft rotating rbrush and we would just put some pumice stone mud on it. when the pumice was gone it would stop being as effective and we would put more on. maybe they had a diamond powder or something (not sure how to make that but just saying).. they might have used very long palm branches or something and as the g force pulls the powder to the edges more can be poured in. a cover would be on top to keep the powder from being wasted and spraying everywhere 34:27 supports this. you could also make these thinner or wider easily by removing the long branches or adding them, tying them back etc.

    December 26, 2016
  62. Gary Shaw said:

    I wonder if a prism or mirror and magnifying glass could be used to melt stone. it shows at 23:41 heat may have been involved

    December 26, 2016
  63. Gary Shaw said:

    there are a lot of assumpions in this that might not be true. I think they know how the pyramids were made but they don't want to reveal it because people wont care about them as much

    December 26, 2016
  64. tektondude1 said:

    start with a browns gas machine which uses electricity to turn water into hydrogenoxygen gas which will burn almost anything on this planet or super heat it so it can be cut like butter.we are not the first,by a long shot.

    December 27, 2016
  65. tektondude1 said:

    we live on a planet that puts out human civilizations like the trash whenever it feels like it ,its' call pole shift.

    December 27, 2016
  66. Sergio Specalsiki said:

    Excellent presentation

    February 18, 2017
  67. double ooh 7 said:

    hi mate I've actually got tool that can make those 3 internal cuts it called a multi-oscillation tool it vibrates at up to 20,000RPM with the thin steel end it easily cuts through a thick solid nail made of iron it can cut something thats harder then its self with ease not tried it on stone but this type of tool can definatly do that type of cut look up the tool on utube for an example 😉

    March 10, 2017
  68. andromedaaudio Netjes said:

    great vid , thanks

    March 19, 2017
  69. ad kest said:

    One of the best presentations about ancient technology with common sense examples how they did it.

    April 29, 2017
  70. Данила Найденов said:

    R.I.P. Andrey Sklyarov

    May 27, 2017
  71. Peter Wallace said:

    Superb lecture.! These guys know their stuff.

    July 1, 2017
  72. AbelieverofourLord said:

    I believe, looking at all these megalithic building structures dotted all over the globe that either the pre-flood era was hugely more advanced than we may think, or the earth is much older than some think and {the people too were very advanced} and has sustained at least 2 cataclysmic floods or destruction where nothing was left on the surface that was not well anchored by weight. Perhaps one-day deep sea exploration may turn up some of these machines…

    August 4, 2017
  73. Robert Johnson said:

    with the disc he said to achieve that type of cutt, you would have to have modern technology. WTF!!! how stupid could i be?

    August 21, 2017
  74. Angel of Art a.k.a. Artwear Couturier said:

    @29:25 … the niches cut into the wall are even more interesting than they first appear … because the material removed from the square hole is lying on the ground nearby … it is a single piece and it's volume fits the hole with no room for any tool to fit between the pieces … and the hole has interior angles so the tool had to pass behind the stone to cut it from the wall … defies all logical explanation.

    September 28, 2017
  75. Jessie L.A. said:

    This is great. Thank you for listing it.

    October 18, 2017
  76. Larry Fisher said:

    There is just one thing that must be proven. Simple right? How did the ancient Egyptians with the knowledge that they had carve the red granite coffer that is located in the king's chamber?

    December 5, 2017
  77. Larry Fisher said:

    How were these made?

    December 5, 2017
  78. Rick Donovan said:

    Condolences to Andrey his family and the team …always.

    January 16, 2018
  79. Derek in Sydney said:

    No mysteries here ("History is a lie agreed upon"). The pyramids and all the stone engineering and statues that accompany them were built before Noah's flood when mankind lived phenomenally long lives (A thousand years in some cases). The people we refer to as Egyptians today were the descendents of some of the people who were on the ark with Nooah who eventually returned to Egypt. They would have known and used the same hieroglyphic symbols as their ancestors which meant that they just carried on as before. However, all the knowledge, tools and power sources used by their predecessors would have been washed away during the great flood. It is recorded in Genesis that the latter Egyptians were making bricks from mud and straw – a far cry from carving out 1,200 tonne obelisks (Search "the unfinished obelisk") and carving out perfect granite blocks for pyramids. The bible is the only history book that can be 100% relied upon; every king, battle, and historical fact mentioned in it has been verified. What you have watched here in this brilliant video (My thank you to the makers of it) is proof of the civilisation prior to Noah's flood . A worse end than the flood is on the way (Read Christ discussing this in your New Testaments). "Believe on the name of the Lord Jesus Christ and you will be saved".

    January 26, 2018
  80. Cindy said:

    Making tools from a piece of a neutron star would be stronger than any tools found on earth.

    February 5, 2018
  81. Cindy said:

    Great presentation and I liked the English translation. It seemed to fit perfect.

    February 5, 2018
  82. Julian brah said:

    We where once highly advanced and than something catastrophic happend so we had to restart. The way things are looking it might happen again.

    February 14, 2018
  83. canadiankewldude said:

    Excellent presentation.
    Why do the so called "experts" never mention all this physical evidence, even tv documentaries hide the truth, why.
    There is obviously a concerted effort to hide much historical evidence from the public.

    Archeologists, including Egyptologist, hide real evidence to the point that stories of government conspiracies begin to sound plausible. At least some, admittedly there are many lies being passed around however, the possibility that there are cover ups, does exist. This video represents a portion of this very fact.

    To understand what they are hiding, it would help if we knew why they are hiding evidence.

    March 25, 2018
  84. JvoxProductions said:

    In a lot of cases it really does look like they just divided up a solid block of rock into the separate puzzle pieces, as if dragging a wire through clay. To me it's the easiest way to create a wall that fits together so perfectly. If you take one block and slice it in two, the two blocks will of course fit together perfectly. One might as well ask how this could be accomplished with clay, since they could clearly change the stone into a malleable state.

    April 10, 2018
  85. Péter Mocsár said:

    If there existed a such high advanced civilization, then the writings of Vedic texts about ancient flying devices, Vimanas could be simple truth.

    May 20, 2018

    at 33:02 i see cutting / shaping on the cement cast part, but this tells me it has to meet some tolerance that the mold did not quite make it to.

    August 10, 2018
  87. canadiankewldude said:

    If powered tools once existed in the ancient past, then it is possible powered vehicles might have been used at one time.
    Somehow they used energy, perhaps not the way we do today, but energy non the less.

    August 13, 2018
  88. Larry Fisher said:

    They are just looking at what they think was used then and what technology we have today. They may have used a very simple technology that we haven't thought about. We have to think outside of the box. What else was at there disposal? They had sand and water and the use of pressure through manpower.

    August 25, 2018
  89. Larry Fisher said:

    I don't know that answer, but maybe someone does. If the Egyptians used a 15 foot circular saw could the cutting of large blocks be done? There is evidence that this is what they used.

    August 25, 2018
  90. Jason Marks said:

    Yeah i lived on earth 20 thousands years ago and cut all the rocks on earth befor human slaves sent to earth so all u humans hade a few things to study gee it works . Funny

    October 22, 2018
  91. McTruman said:

    Sklyrov is one of the best archeologist existed,it sad that he past away several years ago. He would of reveled many forbiden secrets….

    November 6, 2018
  92. Sherpa Cast said:

    I do a lot of knapping with chert, flint, obsidian, etc. Seeing those obsidian spools, or whatever they are, blows me away. They definitely weren't knapped. They had to be cut and abraded/polished with a rotary tool of some kind to maintain perfect symmetry.

    November 23, 2018
  93. Jacqueline X said:

    Excellent video and excellent translation. Thank you.

    December 5, 2018
  94. finn1951 said:

    This is the best documentary ever .

    February 5, 2019
  95. James Harder said:

    Thanks for sharing this most important info.~*

    August 16, 2019
  96. Simon Ekendahl said:

    Ok, this is the best video regarding this matter i’ve ever seen. Good job both the narrator and researcher!!

    August 17, 2019
  97. Wes Anderson said:


    August 17, 2019
  98. Christian Lingurar said:

    like butter, literally 🙂 pinnacle of STONE age 29:33 is it

    September 10, 2019
  99. Larry Boyd said:

    Laser cuts? Using printer type machine?

    October 1, 2019
  100. holger jørgensen said:

    Yaeh, there were a minor society, of highly developed people, from highly developed planets, they might be about 100.000 years a head of Our common developing level/standard.
    They shaped the Great pyramid and Sphinx, solely by thought power, 86.000 years a go,
    by de-materializing the need'ed rock/material, projecting the idea, and materialized it full finish.
    They actually present the Science of the Eternal Life, and 'is home' in the law of the Stuff-side as well as the Life-side of Life.
    Seen from a Stuff-side perspectiv, the Stuff-side is a Motion-Ocean, pure motion.
    Thoughts is also motion, but present the Life-side.
    Life is Not physical, in it self, the Stuff-side is of electric nature, based on Hot and Cold.
    (even Space, is part of the Stuff-side)
    Their only Tool, are Thought power, they came here by thought power, do absolutly every thing by thought power, they have a electric body-structure, to high voltage for earth-people, to come close. So, they didn't used any tools, and as they can materialize and de-materialize a performance-body from moment to moment, there would by no physical signs of any kind.
    The Eternal Mathemathic speaks it's silente language, in the many wonders around the Earth, – megaliths, polygonal accuracy, and the tricky Nubs, all refer to the same highly developed people.They didn't really lived Here, they are far to developed.

    So, we have to differ between tool-marks and Thought-marks.
    You might be surprised about the Eternal Perspectiv, but We are the Only Steady Point, in the existense, the same un-change-able reality, identic with Eternity.

    Thanks for the Great work,

    November 12, 2019

Leave a Reply

Your email address will not be published. Required fields are marked *